To switch from the Arrow Tool to the last used Tool – press W on the keyboard:

The ‘W’ keyboard shortcut will switch you between the Arrow cursor and the last used Tool, and back again.

Useful Archicad Shortcuts:

See some more information about Keyboard Shortcuts at the link below:

Keyboard Shortcuts

To adjust Zones to your updated design and recalculate the Zone area:

Go to Design > Update Zones. This dialog lists the Zones in your project. Selecting a Zone in the list selects it in the project, and vice versa.

If any Zone is selected, click Update Selected Zones.

If none is selected, click Update All Zones.

Successfully updated Zones are shown with a checkmark, with the added (or subtracted) zone area resulting from the update.

If the Zone was created manually it cannot be automatically updated. The layer on which the Zone resides is locked. Unlock the layer in the Layer Settings dialog box and repeat the update process.

• Turn ‘Trace & Reference’ on from any View Map or Layout Book you wish where you want to copy an item/object.
• Use ‘Eye Dropper’ (Alt+C). This will copy that item/object in the current View Map you are in.

Goodies are free add-ons developed by Graphisoft to complete Archicad with specific abilities and features.

https://graphisoft.com/downloads/goodies

Select your region and it will take you to the correct installer.

https://graphisoft.com/downloads/goodies

To switch from the Arrow Tool to the last used Tool – press W on the keyboard:

The ‘W’ keyboard shortcut will switch you between the Arrow cursor and the last used Tool, and back again.

Useful Archicad Shortcuts:

See some more information about Keyboard Shortcuts at the link below:

Keyboard Shortcuts

To adjust Zones to your updated design and recalculate the Zone area:

Go to Design > Update Zones. This dialog lists the Zones in your project. Selecting a Zone in the list selects it in the project, and vice versa.

If any Zone is selected, click Update Selected Zones.

If none is selected, click Update All Zones.

Successfully updated Zones are shown with a checkmark, with the added (or subtracted) zone area resulting from the update.

If the Zone was created manually it cannot be automatically updated. The layer on which the Zone resides is locked. Unlock the layer in the Layer Settings dialog box and repeat the update process.

• Turn ‘Trace & Reference’ on from any View Map or Layout Book you wish where you want to copy an item/object.
• Use ‘Eye Dropper’ (Alt+C). This will copy that item/object in the current View Map you are in.

You can also Register a Wish on the “Wishes Forum”. A Wish is a function or tool improvement you would like to see in Archicad.

Firstly create a Login for your Graphisoft Community identity using your Graphisoft ID. https://community.graphisoft.com/t5/International/ct-p/EN

Log in and Select Wishes to create a new topic or review existing requests.

By selecting Transparency your clear glass will become transparent. If you want some of your glass to not be transparent you can change the type to a low transmittance like Glass – Satin under Model – Override Surfaces. This glass then appears solid.

By selecting Transparency your clear glass will become transparent. If you want some of your glass to not be transparent you can change the type to a low transmittance like Glass – Satin. This glass then appears solid.

To adjust Zones to your updated design and recalculate the Zone area:

Go to Design > Update Zones. This dialog lists the Zones in your project. Selecting a Zone in the list selects it in the project, and vice versa.

If any Zone is selected, click Update Selected Zones.

If none is selected, click Update All Zones.

Successfully updated Zones are shown with a checkmark, with the added (or subtracted) zone area resulting from the update.

If the Zone was created manually it cannot be automatically updated. The layer on which the Zone resides is locked. Unlock the layer in the Layer Settings dialog box and repeat the update process.